Highlights
SMAR-Azure
We design our sails with Azure Project, the most advanced, complete and extremely accurate sail design software.
SPINNAKERS
Our Spinnakers are designed with state-of-the-art 3-D sail design software in Full-Radial or Tri-Radial cut.

The Full Radial design is the most popular choice and strongest construction. The radial shaped panels fan out from the three corners Head, Clew and Tack and run throughout the sail. The Tri-Radial layout, which has horizontal panels in the middle, is eligible for smaller sails with lower loads. This construction is less expensive in production because it is easier to manufacture and cloth can be used more efficiently.
Standard Gennaker Asymmetrical Spinnaker Full Radial Symmetrical Spinnaker Full Radial

The benefit of both constructions is that the stress, which is radiating from Head, Clew and Tack into the sail, is along the seams instead of across them. The result is a strong sail and minimizes stretch and distortion. Furthermore the radial construction allows a more precise alignment of loads, while the number of panels enables the use of 3-D shaping and creating the optimum flying shape. In addition to the sail design our excellent handcraft finish ensures precision shaped panels, strength, durability and performance.

Our standard features are:
– Individual Sail design
– Full or Tri-Radial panel layout
– US or European Spinnaker Cloth
– Strong radial patches (Offshore range)
– Head, Tack and Clew labeling
– Colour-coded leech and foot tapes
– Webbed on corner rings for easy attachment of sheets
– Large sail bags, Turtle bags are an additional cost
– Up to 3 colours included

Utilize your individual colour on our design template.
Our experienced sail designers will do their best to match your design.

Our Spinnakers come in three styles:
– the symmetrical, the asymmetrical and our standard spinnaker.

Symmetrical Spinnaker Rolly Tasker Symmetrical All Purpose Spinnaker
Rolly Tasker symmetrical All Purpose spinnakers are the ideal sail for the sporty ambitious weekend sailor, long passage maker or serious racer on courses from 80 to 180 degrees.


Asymmetrical Gennaker Rolly Tasker Asymmetrical MPS-Spinnaker
The Rolly Tasker MPS Spinnaker is an easy to use sail which optimizes the sailing performance in light winds on courses from 75 to 160 degrees. It combines the characteristics of a reaching Genoa with a spinnaker and therefore might fill a gap in your sail inventory. The typical characteristic is a longer Luff than the leech. The Tack will be fixed at the bow fitting or Gennaker boom and is thereby flown without a spinnaker pole: hence much easier to handle than a symmetrical spinnaker. For this reason they are widely used on cruising boats, though they are also an important sail in a racer’s wardrobe to maximize upwind performance. When combined with a spinnaker sock the asymmetrical spinnaker becomes a sail that can be used by single or short-handed crews under all conditions.

Standard Gennaker Rolly Tasker Standard Spinnakers
Next to our individualized spinnaker we produce standard symmetrical and asymmetrical spinnaker. They are produced in 20 sizes for the most commonly made yachts in a standard colour full radial panel layout. This enables us to supply you with top quality sails at very competitive prices. The spinnaker cloth, sail design and finish will meet the high quality level of our individual sail production. In addition you can purchase a suitable sized spinnaker sock for easy handling.

To offer a complete package we can deliver configured Polyester or Dyneema sheets which are produced in-house with our modern rope braiding machines.